EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Fischer Rebaring Chemicals
Fischer Rebaring Chemicals
Prominent & Leading Manufacturer from Kanpur, we offer 1c premium gun foam pup 750 b3, 1c perimeter adhesive foam pup p 750, injection mortar fis sb, fis v plus injection mortar, highbond-anchor dynamic fhb dyn and premium construction silicone dbsa.
1C Premium Gun Foam PUP 750 B3
Product Price: Rs 800 / PieceGet Best Price
Product Brochure
Product Details:
| Packaging Size | 750 ml |
| Brand | Fischer |
| Packaging Type | Aerosol Can |
| Grade Standard | Industrial |
| Strength | High |
| Chemical Resistance | Water |
| Variant | PUP 750 B3 (EN) |
| Country of Origin | Made in India |
The fischer gun foam Premium PUP 750 B3 is suitable for the filling, insulation and isolation of window connection joints and the filling of the connection joints of door frames, finished elements, wall connections, wall penetrations and cavities. The gun foam is characterised by its high joint sound insulation. The gun foam is easy to dose, enables easy filling and insulation, and ensures the optimum use of materials. The beige fischer PUP 750 B dispenser has a solid valve that offers top security against blockages and the loss of gas during sea transport, for example. Protective gloves are included. The fischer PUP 750 B3 does not have approval in Germany.
- The low level of foam expansion during the curing period avoids reworking, thus guaranteeing a simple and time-saving application.
- The easy dosage allows for a controlled filling and sealing, and ensures that the correct amount is used.
- The proven 60dB sound insulation fulfils the standards of modern sound insulation and helps to reduce noise.
- The new non-sticking safety valve guarantees long-lasting functionality.
Certifications:
- Proven joint soundproofing R(ST,w)=60 (-1;-4) dB in line with ISO EN 717-1
- EMICODE® EC 1 Plus - very low emission
Applications:
- Insulating and filling window connection joints, around window sills and shutter boxes
- Insulating and filling in roofing work and dry construction
- Insulating and filling finished elements, wall connections, wall penetrations and cavities
- Insulating and filling pipe penetrations and ventilation ducts
Building materials:Bonds to all standard building materials such as:
- Concrete
- Anodised layer
- Gypsum plasterboard
- Wood
- Sand-lime brick
- Plastics (not on PE, PP, Teflon, silicone)
- Masonry
- Metals with priming coat
- Plaster
Get Best QuoteRequest A Callback
1C Perimeter Adhesive Foam PUP P 750
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Packaging Size | 750 ml |
| Brand | Fischer |
| Packaging Type | Aerosol Can |
| Strength | High |
| Color | Concrete Grey |
| Variant | PUP P 750 G B2 |
| Max. Foam Yield (free foaming) | 45 I |
The fischer perimeter gun adhesive Premium PUP P750 was specially developed for bonding expanded polystyrene panels for perimeter insulation on the basis of DIN 4108-2. Particularly on cold bitumen sheeting and bitumen coatings, the foam has an especially high adhesion rating. The very low level of post-expansion avoids the formation of cavities and guarantees a long-lasting insulation. It can bond around 13 m² of wall, which makes the fischer PUP P 750 particularly cost-effective. Further application areas are the glueing of insulation elements and the filling of cavities. The very low level of post-expansion prevents the formation of cavities and guarantees a reliable bond. Protective gloves for end users are included.
- Bonding expanded polystyrene panels
- Insulating and filling wall penetrations
- Foaming in electrical installations
- Filling joints and cavities in all internal constructions
- Fixing and sealing walls and ceilings
Building Materials:
- Concrete
- Bitumen coatings
- Anodised layer
- Gypsum plasterboard
- Wood
- Cold bitumen sheeting
- Plastics (not on PE, PP, Teflon, silicone)
- Masonry
- Metals with priming coat
- Plaster
Functionality:
- 1-component PU foam
- Building material class B2
- Processing temperature environment: +10 °C to +25 °C (can temperature: +5 °C to +25 °C)
- Non-tacky within approx. 10 minutes
- Can be cut within approx. 40 minutes
- Temperature resistant from -40 °C to +90 °C
- Low heat conductivity
- Apply a min. of 3 end-to-end stripes per board, vertically from bottom to top on the external wall (spacing approx. 30 cm). The bottom board should be on fixed ground as protection from later slipping. After approx. 10 minutes apply the boards onto the holding surface and press hard.
- Fresh foam stains can be removed immediately with fischer PU cleaner.
Get Best QuoteRequest A Callback
Injection Mortar FIS SB
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 390 ml |
| Packaging Type | Cartridge |
| Scale unit | 180 |
| Variant | FIS SB 390 S |
| Application Temperatures | -15 to +150 Deg C |
The silane technology of the fischer injection mortar FIS SB enables a really high bond strength and therefore a really high load level. The European Technical Approval for cracked and non-cracked concrete and for seismic loads offers added safety. The fischer injection mortar FIS SB is suitable for use with the system components for fixation both inside and outside. It can be used with the threaded rod FIS A, the internal threaded anchor RG MI, and the rebar anchor FRA and reinforcement bars. The variable anchorage depths optimise the installation time and use of materials. The application temperatures range from -15° to +150° C depending on the mortar variant.
- The injection mortar FIS SB achieves a really high load level thanks to its bond strength.
- Variable anchorage depths from 4x to 20x the threaded rod diameter enable perfect adaptation in line with the load to be applied, thus ensuring an optimised installation time and use of materials.
- Top application temperatures of up to +150°C open up new usage areas for bonded anchors.
- The processing of the mortar is even approved down to a chilly –15°C.
- In combination with the internal threaded anchor RG M I, this product enables surface-flush removal and the reuse of the fixing point. This provides top flexibility.
- The standard threaded rod FIS A can be set for light dynamic loads with the mortar injection system FIS SB in the sizes M12 and M16 in steel grade 8.8 or in the sizes M12, M16, M20 and M24 in stainless steel R and the fischer filling set.
Applications:
- Heavy steel constructions
- Silo installations
- Tall shelving
- Sound barriers
- Guard rails
- Staircases
- Suspensions of pipes, cable trays and suspended ceilings
- Temporary fixings, e.g. for machines
- Scaffold anchoring
Get Best QuoteRequest A Callback
FIS V Plus Injection Mortar
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 360 ml |
| Packaging Type | Cartridge |
| Variant | FIS V Plus 360 S |
| Brand | Fischer |
| Model | FIS V Plus |
The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system TherMax. The variant FIS VS Plus Low Speed enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW Plus High Speed enables swift work progress even at low temperatures.
- The FIS V Plus injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications.
- The ETA assessment for a service life of 100 years offers permanent safety for all applications.
- The approved use in water-filled drill holes enables a wide range of applications, even under harsh environmental conditions.
- FIS VW Plus High Speed has a significantly shorter hardening time than FIS V Plus, which ensures swift work progress even at low temperatures.
- The FIS VS Plus Low Speed has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths.
- The extensive range of accessories is ideally suited to the FIS V Plus injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications.
Applications:
- Steelwork constructions
- Timber constructions
- Guard rails
- Façades
- Staircases
- Steel brackets
- Machines
- Masts
- Awnings
- Canopies
- Gates
- Consoles
- Pipelines
- Gratings
- Satellite antennas
Building materials:Approved for anchorings in:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Hollow blocks made from lightweight concrete
- Hollow blocks made from concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Solid sand-lime brick
- Aerated concrete
- Solid brick
Approved for:
- Rebar connections
- Remedial wall tie VBS 8
- Weather facing reconstruction system FWS II
- Stand-off installation TherMax
Functionality:
- FIS V Plus is a 2-component injection mortar based on a vinyl ester hybrid concept.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
- The mortar is extruded bubble free from the drill hole base.
- The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
- The injection cartridges are quick and easy to use with the fischer dispensers.
- Partially used cartridges can be reused by changing the static mixer.
Get Best QuoteRequest A Callback
Highbond-Anchor Dynamic FHB dyn
Product Price: Rs 1,000 / PieceGet Best Price
Product Details:
| Packaging Size | 380 ml |
| Packaging Type | Cartridge |
| Physical form | Liquid |
| Usage/Application | Construction |
| Variant | FHB-A dyn 12 x 100/50 |
The fischer Highbond-Anchor dynamic FHB-A dyn is processed with the injection mortar FIS HB. It is used to support dynamic alternating loads. The approved anchor with its cone shape ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete. It securely fixes guide rails for elevators, production robots, gantry and overhead cranes and tunnel ventilators (jet fans). The classification in accordance with fire resistance class R120, variants made from highly corrosion-resistant steel or an additional sleeve for higher transverse forces with the threaded rod FHB-A dyn V provide extra security.
- During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.
- The cone shape of the FHB-Adyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete.
- The anchor rod FHB-A dyn is also available made from highly corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels.
- The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn, and therefore provides an increased level of safety.
Applications:
- Jib cranes
- Gantry and overhead cranes
- Guide rails for elevators
- Tunnel ventilators (jet fans)
- Gantries in road construction
- Antennas and transmitter masts
- Industrial robots
Functionality:
- The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB.
- FHB dyn is approved for pre-positioned and push-through installation.
- Extruding the mortar causes the two components to be mixed and activated in the static mixer.
- The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
- The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
- The lock nut prevents the nut from becoming loose.
Get Best QuoteRequest A Callback
Premium Construction Silicone DBSA
Product Price: Rs 1,200 / PieceGet Best Price
Product Brochure
Product Details:
| Packaging Size | 310 ml |
| Packaging Type | Cartridge |
| Applications | Construction |
| Item Form | Paste |
| Strength | High |
| Variant | DBSA BG (DE/EN), DBSA W (DE/EN) |
| Colour | Beige, White |
The fischer premium construction silicone DBSA has a very low volume shrinkage and low odour formation, making it ideal for challenging applications. The alkoxy-based silicone sealant offers particularly high adhesion properties on a variety of substrates both inside and outside. The construction silicone is suitable for window sealing and for movement and connection joints on walls and roofs. Thanks to its fungicidal properties, the fischer DBSA is ideal for use in sanitary installations. The silicone is easy to use and smooth out, thus enabling rapid work progress.
- The high-quality, neutral silicone sealant with a very low volume shrinkage is suitable for demanding applications in construction and the industrial sector, and guarantees a high degree of functional safety.
- DBSA is low-odour and is therefore ideal for use in confined spaces.
- The silicone is easy to apply and smooth out, thus allowing for fast work progress and easy, time-saving joining.
- The high wear resistance provides the surface with a high level of protection during cleaning and ensures perfect optics over a long period of time.
Certifications:
- EN 15651 - Part 1: F-EXT-INT-CC (25LM)
- EN 15651 - Part 2: G-CC (25LM)
- EN 15651 - Part 3: S (XS1)
- French VOC-emission class A+
Applications:
- Connection and expansion joints in the construction industry (e.g. windows, doors, façades, light domes)
- Window glazing
- Movement and connection joints in kitchens, sanitary areas and installations
- Fixing mirrors (transparent version)
- Sealing machines, containers and building apparatus
Building Materials:
- Concrete
- Chrome
- Stainless steel
- Anodised layer
- Enamel, Tiles, Ceramics
- Glass, glazed surfaces
- Wood (with primer)
- H-PVC
- Copper, brass
- Masonry
- PMMA, PC, Polyester
- Steel
- Zinc
Functionality:
- Chemical base: 1-component silicone neutral alkoxy
- Fulfils DIN EN ISO 11600 F+G 25
- Permanently elastic
- Low-odour
- With fungicide
- Skin formation time: 10 to 15 min
- Processing temperature: +5 °C to +40 °C
- Temperature resistance: -40 °C to +150 °C
- Shore-A hardness approx. 25
- Permitted overall deformation: 25%
- Non-corrosive
- Very good resistance to weather, ageing and UV
- Compatible with paint
- Not paintable
- Resistant to wear and streak-free
- Selection table for substrates
Get Best QuoteRequest A Callback
Acrylic Sealant Standard DA
Product Price: Rs 800 / PieceGet Best Price
Product Brochure
Product Details:
| Packaging Size | 310 ml |
| Brand | Fischer |
| Packaging Type | Cartridge |
| Strength | High |
| Colour | Gray |
| Variant | DA GR (DE/EN) |
Advantages:
- The good hold on absorbent substrates guarantees a secure sealing and thus allows for a reliable and economic application.
- The sealant can be painted and plastered and allows for a good hold of standard paints/plasters on the sealant, thus guaranteeing a non-critical post-treatment.
- The water-based acrylate sealant has a neutral odour and is therefore ideal for use in confined spaces.
Certifications:
- EN 15651 - Part 1: F-EXT-INT
Applications:
- Fractures in masonry and other solid building materials in internal areas
- Connection joints with low movement
- Joints in window sill connections
- Connection joints inside buildings between windows, doors, stairs, ceilings and walls
Building Materials:
- Concrete
- Anodised layer
- Gypsum
- Gypsum plasterboard
- Wood
- H-PVC
- Sand-lime brick
- Clinker brick
- Masonry
- Aerated concrete
- Plaster
- Brick
Functionality:
- Chemical base: 1-component dispersion acrylic
- Elasto-plastic
- Low-odour
- Skin formation time: approx. 20 minutes
- Processing temperature: +5 °C to +40 °C
- Temperature resistance: -20 °C to +75 °C
- Non-corrosive
- Compatible with paint
- Can be painted and plastered
- Frost-protected in the cartridge
- Free of silicone, MDI and solvents
Get Best QuoteRequest A Callback
Injection Mortar FIS HB
Product Price: Rs 800 / PieceGet Best Price
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 360 ml |
| Packaging Type | Cartridge |
| Brand | Fischer |
| Variant | FIS HB 345 S |
| Languages on the cartridge | DE, EN, FR, ES, NL, CS |
The silane technology of the fischer injection mortar FIS SB enables a really high bond strength and therefore a really high load level. The European Technical Approval for cracked and non-cracked concrete and for seismic loads offers added safety. The fischer injection mortar FIS SB is suitable for use with the system components for fixation both inside and outside. It can be used with the threaded rod FIS A, the internal threaded anchor RG MI, and the rebar anchor FRA and reinforcement bars. The variable anchorage depths optimise the installation time and use of materials. The application temperatures range from -15° to +150° C depending on the mortar variant.
- The Highbond system FHB II achieves the highest load values in cracked concrete. This means that fewer fixing points and smaller anchor plates are required.
- The injection mortar FIS HB can be worked with the threaded rod FHB II-A S (short version ) or L (long version). Thus, you can select the most economical solution based on requirements.
- The large container shape of the injection mortar FIS HB is ideally suited to series installation.
Applications:
- Guard rails
- Façades
- Staircases
- Steel brackets
- Machines
- Silo installations
- Masts
- Rash protection
- Steelwork constructions
- Timber constructions
Functionality:
- The injection mortar FIS HB is suitable for pre-positioned and push-through installation.
- Resin and hardener are stored in two separate chambers and are only mixed and activated in the static mixer when dispensed through the injection cartridge.
- FIS HB can be used with the threaded rods FHB II-A S and FHB II-A L and glues the threaded rod completely in the drill hole.
- When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
- The styrene-free vinyl ester mortar fully seals the drill hole.
Get Best QuoteRequest A Callback
FIS P Injection Mortar
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Material | Autoclaved Aerated Concrete |
| Usage/Application | Construction |
| Packaging Size | 380 ml |
| Packaging Type | Cartridge |
| Variant | FIS P 380 C |
| Brand | Fischer |
The fischer Injection mortar FIS P is a polyester resin mortar for the economical fixing of gratings, cantilevers and handrails in masonry which do not require approval. The FIS P is processed with the system components fischer threaded rod FIS A, fischer internal threaded rod FIS E together with the fischer injection anchor sleeves indoors and outside. Cartridges already opened can be reused by simply changing the static mixer. This saves time and money during installation.
- The FIS P is the economical solution for anchorings in masonry that do not require approvals.
- The FIS P 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. This helps to reduce procurement costs.
Applications:
- Gratings
- Gates
- Handrails
- Consoles
- Pipelines
Building Materials:
- Vertically perforated brick
- Hollow block
- Perforated sand-lime brick
- Solid sand-lime brick
- Aerated concrete
- Solid brick made from lightweight concrete
- Solid brick
Functionality:
- The FIS P is a 2-component injection mortar based on polyester resin.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
- The mortar is extruded bubble free from the drill hole base.
- The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
- Partially used cartridges can be reused by changing the static mixer.
Get Best QuoteRequest A Callback
FIS EP Epoxy Mortar
Product Price: Rs 1,000 / KgGet Best Price
Product Brochure
Product Details:
| Usage/Application | Construction |
| Packaging Size | 585 ml |
| Packaging Type | Cartridge |
| Model No | FIS EP |
| Brand | Fischer |
| Variant | FIS EP 585 S |
In addition to the FIS EM Plus and the FIS EB, the FIS EP belongs to the family of fischer epoxy resin mortars. The FIS EP is the economical solution for all applications in cracked and non-cracked concrete that do not require approval. In combination with the anchor rod FIS A, the loads to be introduced can be selected variably by choosing the anchorage depth.
- FIS EP is the economical epoxy resin mortar for applications in concrete that do not require approval.
- The epoxy mortar FIS EP can also be used in cracked concrete for construction site convenient installation.
- With the anchor rod FIS A, the loads to be introduced can be selected variably by choosing the anchorage depth.
- FIS EP can be used for smooth installation with the standard fischer accessories.
Applications:
- Columns
- Beams
- Shear dowels
- Starter bars
- Polders
Functionality:
- The epoxy mortar FIS EP combined with the FIS A threaded rod is suitable for pre-positioned and push-through installation.
- Resin and hardener are stored in two separate chambers, thus are not mixed and activated until extrusion through the static mixer.
- The mortar bonds the entire surface of the anchor with the drill hole wall and seals off the drill hole.
- The anchor is set manually by slightly rotating it until the anchor reaches the drill hole base.
- During push-through installation, the annular gap is filled with FIS EP.
Get Best QuoteRequest A Callback
Injection Mortar FIS EM Plus
Product Price: Rs 1,000 / PieceGet Best Price
Product Details:
| Usage/Application | Construction |
| Packaging Size | 390 ml |
| Packaging Type | Cartridge |
| Brand | Fischer |
| Variant | FIS EM Plus 390 S |
| Model | FIS EM Plus |
| Country of Origin | Made in India |
The fischer injection mortar FIS EM Plus is a high-quality epoxy mortar for top load-bearing capacity in cracked and non-cracked concrete and for seismic applications in performance categories C1 and C2. It is suitable for fixations of shear connectors for concrete layers, tall shelvings, and heavy steel constructions both inside and outside. The injection mortar is processed with the approved system components fischer threaded rod FIS A with variable anchorage depths and fischer internal threaded anchor RG M I as well as with reinforcement bars. The epoxy mortar is ideally suited for rebar connections that are installed with a large drill hole diameter and a high anchorage depth. It can also be used for diamond-drilled and water-filled drill holes.
- The ETA assessment guarantees a service life of 100 years. The expert report of IEA Stuttgart even confirms a working life up to 120 years and thus underlines the reliability and durability of the FIS EM Plus.
- The optimised formulation of the epoxy resin mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
- The mortar can be used for rebar connections from diameter 8 to 40, including seismic applications.
- With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth.The mortar is approved for diamond drilled and water-filled drillholes as well as seismic applications and thus offers safety under extreme conditions.
- For practical use on the building site, FIS EM Plus can be processed at low temperatures down to -5°C.
Applications:
- Post-installed rebar connections
- Jointers for concrete layers
- Rim beam anchorings
- Seismic applications
- Anchorings in diamond-drilled or in waterfilled drill holes
- Heavy steel constructions
- Silo installations
- Tall shelving
- Sound barriers
- Temporary or removable fixings (with internal threaded anchor RG M I)
- Anchorings in sealing surfaces according to WRL (Water Ressources Law)
Functionality:
- The epoxy mortar FIS EM Plus combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation and with the internal threaded anchor RG M I for pre-positioned installation.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
- The mortar is injected bubble-free from the drill hole base.
- The mortar bonds the entire surface of the anchor with the drill hole wall and seals off the drill hole.
- The anchor is set manually by lightly rotating it until it reaches the drill hole base.
- During push-through installation, the annular gap between the anchor rod and attachment is filled with FIS EM Plus.
Get Best QuoteRequest A Callback
FIS EB Epoxy Mortar
Product Price: Rs 1,000 / KgGet Best Price
Product Details:
| Material | Autoclaved Aerated Concrete |
| Usage/Application | Construction |
| Packaging Size | 390 ml |
| Packaging Type | Cartridge |
| Model No | FIS EB 390 S |
| Brand | Fischer |
The fischer injection mortar FIS EB is an economical epoxy resin mortar for standard applications in cracked and and non-cracked concrete and for rebar connections. It is suitable for fixing heavy loads both inside and outside. The FIS EB is processed with the approved system components fischer threaded rod FIS A or with reinforcement bars. The FIS EB can be used in dry or wet concrete, but also in water-filled drill holes. This makes the epoxy resin mortar a secure and reliable system even in unfavourable conditions.
- FIS EB is approved for post-installed rebar connections according to ETA and for use in cracked concrete according to ETA and ICC.
- The injection mortar achieves a reliable performance in many applications which enables economical use.
- FIS EB can be used under various installation conditions and is approved for seismic applications, making it a safe system.
- Variable anchorage depths allow ideal adaptation to the load to be transmitted.
Applications:
- Heavy steel constructions
- Consoles
- Silo installations
- Tall shelving
- Post-installed rebar connections
Functionality:
- The epoxy mortar FIS EB combined with the threaded rod FIS A is suitable for pre-positioned and push-through installation.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection capsule in the static mixer.
- The mortar is injected bubble-free from the drill hole base.
- The mortar bonds the entire surface of the threaded rod with the drill hole wall and seals off the drill hole.
- The threaded rod is set manually by slightly rotating it until it reached the drill hole base.
- During push-through installation, the annular gap between the threaded rod and the attachment is filled with FIS EB.
Get Best QuoteRequest A Callback
1C Premium Installation Foam PU 500/750
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Brand | Fischer |
| Packaging Type | Aerosol Can |
| Form | PU |
| Variant | PU 750 B3 (EN/FR/AR) |
| Max. Foam Yield (Free Foaming) | 41 I |
| Capacity | 750 ml |
| Colour | Beige |
The fischer rapid installation foam Premium PU 500/750 is ideal for the filling, insulation and isolation of window connection joints and the filling of the connection joints of door frames, finished elements, wall connections, wall penetrations and cavities. It has extremely high joint sound insulation. The test report for water pressure resistance confirms its suitability as a fountain foam. The beige fischer adapter foam PU 500/750 dispenser is fitted with the fischer fix adapter, which enables the further use of opened cans. The solid valve offers top security against blockages and the loss of gas. Protective gloves for end users are included.
Advantages:
- The reclosable fix adapter allows for immediate use and for the reuse of opened cans, thus guaranteeing long-lasting functionality.
- The used solid valve prevents adhesion when being stored horizontally and premature gas loss.
- The rapid installation foam has been approved as watertight by an external inspection and is thus suitable for use in wet conditions. It fulfils the requirements of a well foam.
- The ergonomic handle sits perfectly in the hand and allows for easy use.
Certifications:
- General test certificate from building authorities P-NDS04-136 for B2
- Proven joint soundproofing: R(ST,w)=61 (-1; -3) dB in line with ISO EN 717-1
- Test for watertightness for the adhesion of manhole rings
Applications:
- Bonding and sealing manhole rings
- Insulating and filling in roofing work and dry construction
- Insulating and filling window connection joints, around window sills and shutter boxes
- Insulating and filling finished elements, wall connections and wall penetrations
Building materials:Bonds to all standard building materials such as:
- Concrete
- Anodised layer
- Gypsum plasterboard
- Wood
- Sand-lime brick
- Plastics (not on PE, PP, Teflon, silicone)
- Masonry
- Metals with priming coat
- Plaster
Functionality:
- 1-component PU foam
- Building material class B2 or B3
- Processing temperature environment: +5 °C to +35 °C (can temperature: +5 °C to +25 °C)
- Non-tacky within approx. 20 minutes
- Can be cut within approx. 40 minutes
- Cures within 5 to 8 hours
- Temperature resistant from -40 °C to +90 °C
- Layer thicknesses > 50 mm: foam in several layers and then dampen.
- Fresh foam stains can be removed immediately with fischer PU cleaner.
Get Best QuoteRequest A Callback
Premium High Temperature Silicone DHS
Product Price: Rs 1,000 / PieceGet Best Price
Product Brochure
Product Details:
| Packaging Type | Cartridge |
| Item Form | Paste |
| Strength | High |
| Packaging Sizes | 310 ml |
| Variant | DHS RB (DE/EN) |
| Colour | Reddish Brown |
The fischer high-temperature silicone DHS is suitable for the sealing of joints around cookers, ovens and fireplaces, joints on boilers and industrial furnaces, and joints in heating, ventilation and sanitary installations. The acetate interlacing fischer DHS is temperature-resistant for applications up to +280°C and even up to +300°C for short periods. The high chemical resistance also allows use in environments with exposure to chemicals. The silicone is easy to apply and smooth out. This allows for rapid progress.
- The high temperature resistance of up to +300 °C means that DHS can be used for joints with increased thermal load.
- Meanwhile, the high resistance to chemicals also allows for use in areas subjected to chemical loads, thus offering a high level of application safety.
- The very good adhesion to smooth surfaces allows for the components to be completely sealed. This allows for reliable functioning.
- DHS is easy to apply and smooth out. This allows for efficient work, and helps to guarantee a simple and time-saving application.
Applications:
- Sealing of joints around cookers, ovens and fireplaces
- Sealing of joints around boilers and industrial furnaces
- Sealing of joints around pipes and channels subjected to high temperatures
- Sealing of ventilation grilles
- Sealing of air conditioning units
Building Materials:
- Aluminium (with primer)
- Chrome
- Stainless steel
- Anodised layer
- Enamel
- Tiles
- Glass
- Glazed surfaces
- Ceramics
- Not for corrosive adhesive surfaces such as non ferrous heavy metal, sheet zinc etc.
Functionality:
- Chemical base: 1-component silicone acetate
- Permanently elastic
- Skin formation time: approx. 10 - 15 minutes
- Processing temperature: +5 °C to +40 °C
- Temperature resistance: -40 °C to +300 °C
- Shore-A hardness 25
- Very good resistance to chemicals
- Very good resistance to weather, ageing and UV
- Not paintable
- Free of MDI and solvents
Get Best QuoteRequest A Callback
FIS VL Injection Mortar
Product Price: Rs 1,000 / PieceGet Best Price
Product Details:
| Usage/Application | Construction |
| Packaging Size | 360 ml |
| Packaging Type | Cartridge |
| Brand | Fischer |
| Scale Unit | 180 |
| Model | FIS VL |
| Variant | FIS VL 360 S |
The fischer injection mortar FIS VL is a vinyl ester hybrid mortar with approval for fixing standard applications in cracked concrete and masonry. The FIS VL is processed with the approved system components fischer threaded rod FIS A and fischer internal-threaded anchor RG M I indoors and outside. The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility. The shorter hardening time of the variant FIS VL HIGH SPEED enables swift work progress even at low temperatures.
- The FIS VL is approved for use in cracked concrete and masonry, and achieves a high load-bearing capacity in these conditions.
- The injection mortar, based on vinylester resin, allows for anchorings in water-filled drill holes (410 ml cartridges only), thus allowing for rapid progress.
- The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.
- FIS VL HIGH SPEED has a significantly shorter curing time than FIS VL, thus also ensuring swift work progress even at low temperatures.
Applications:
- Steelwork constructions
- Timber constructions
- Guard rails
- Façades
- Staircases
- Steel brackets
- Machines
- Masts
- Awnings
- Canopies
- Gates
- Consoles
- Pipelines
- Gratings
- Satellite antennas
Building Materials:Approved for anchorings in:
- Concrete C20/25 to C50/60, cracked
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Solid sand-lime brick
- Solid brick
- Rebar connections
- Aerated concrete
Also suitable for:
- Concrete C12/15
- Hollow blocks made from concrete
Functionality:
- The FIS VL is a 2-component injection mortar based on vinyl ester.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
- The mortar is extruded bubble free from the drill hole base.
- The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
- The 410 ml coaxial cartridges can be easily used with the fischer FIS AC dispenser.
- Partially used cartridges can be reused by changing the static mixer.
Get Best QuoteRequest A Callback